Blackmer® is going all in on blue! Beginning in June, Blackmer Centrifugal & Gear Pumps Changing to "Blackmer Blue."

You might be familiar with our revolutionary sliding vane technology, but how much do you know about our vane construction offerings? Blackmer® Sliding Vane Pumps are available in a variety of materials to better meet your unique application requirements. However, the vane composition itself must be taken into careful consideration, as the vane must be strong enough to withstand the stresses of pressure, centrifugal and mechanical forces. Each application also demands chemical compatibility and good wear properties to support a long life of vane performance.

Systems used in liquid transfer and process applications work across a wide range of operating points. Pumps are often designed to operate at a single specified design point, but the disparity between the pumps and their full systems can be devastating to traditional pump technologies.

Cavitation can ruin internal pump components, and most pumps fail when operating under sustained cavitation, pumping liquid/vapor mixtures and carrying out poor Net Positive Suction Head (NPSH) applications.

All transfer and process pumps are tasked with handling some percentage of suspended solids, but not all pumps are up to this challenge. Weld slag, rust and sand are just a few examples of solids that can disrupt fluid flow in lesser pumps.

Catastrophic pump failure is possible in centrifugal and gear pumps due to dry run operation, and despite advances in preventing the failures associated with dry run, these pumps still are not as equipped to handle the issue as the Blackmer® MAGNES Series.

Blackmer®, part of PSG®, a Dover company and a global leader in specialty pumps and reciprocating compressor technologies, is proud to be the recipient of the annual Community Partner Outreach Award from Early Learning Neighborhood Collaborative (ELNC).

As global demand for Autogas as an alternative motor fuel grows, there is a corresponding increase in the need for pumps that can optimize its handling. One technology that has risen to the fore in this realm is the Regenerative Turbine Pump, with PSG® brand Ebsray® the leading developer of this technology, which offers a level of efficiency, differential-pressure buildup and flow rates that centrifugal and side-channel pumps can’t match.

Explanation of various spare parts kits available for Blackmer Sliding Vane Pumps and Reciprocating Gas Compressors and where to find them on the website.

This latest article "Pump system analysis: Tanks, piping, hoses and everything in between" written by Geoff Vanleeuwen, Product Management Director for Blackmer, can be found in Processing Magazine.

Blackmer® a Dover company and a global leader in specialty pumps and reciprocating compressor technologies, is pleased to announce the availability of its new MAGNES Series Sliding Vane Magnetic Drive Pumps.

Now available for download, the newly redesigned HD Series Reciprocating Gas Compressor brochure.

Read an article on "Determining Overall Pump Lifecycle Costs" in Chemical Engineering, written by Geoff Vanleeuwen, Product Management Director for Blackmer.

This latest article "How Sealless Sliding Vane Pumps Work in Chemical Transfer" written by Geoff Vanleeuwen, Product Management Director for Blackmer, can be found in Pumps & Systems.

Download the brand new Blackmer LB Series Propane Compressor brochure.

Blackmer® is pleased to announce that its GNX Series Sliding Vane Pumps are now available in 3- and 4-inch models.

Blackmer® has created a solution for pump cavitation damage in the form of its Cavitation Suppression Liner. The Blackmer Cavitation Suppression Liner eliminates the vibration, excessive noise and pump cavitation damage that occurs.

COMPANY: Reques e Hijos, S.L. ? LOCATION: Collado Villalba, Spain ? MARKET: Fuel Distribution ? DISTRIBUTOR: Cetil Dispensing Technology S.L. ? CHALLENGE: Identify and utilize a robust, reliable transport pump that could help a fledgling fuel-distribution company build a fleet that could create loyalty in a critical market and customer base ? SOLUTION: Blackmer® TX Series Sliding Vane Pumps.

Blackmer® has developed a new white paper and video on pump cavitation. These resources illustrate how Blackmer positive displacement sliding vane pumps incorporate a revolutionary Cavitation Suppression Liner that mitigates and even eliminates the harmful effects of pump cavitation.

Blackmer® is pleased to announce that an upgrade to the mechanical-seal assembly on the Ebsray® RC Series Regenerative Turbine Pumps is now complete.

Sliding vane pumps handle gas-heavy three-phase liquids that are common in many oilfield applications.

Blackmer® is pleased to announce the availability of its new GNX Series Sliding Vane Pumps.

For many years, the pumping technology of choice in many fluid-transfer applications in oil and gas production has been the centrifugal pump.

Shaft misalignment can result in comprised pumping system uptime, reliability and safety. However, advancements in positive displacement sliding vane pumps mean that they can offer a more efficient, reliable and safer option when transferring critical chemicals in both fixed and portable systems.

An increase in oilfield activity has also led to an increase in the amount of emitted vapours and the use of vapour-recovery units at oilfield storage sites. This article shows how the proper installation of a VRU skid assembly for in-the-field use optimizes VRU performance.

Paying tribute to the past to perpetuate the future.

How this positive displacement technology differs from rotary gear pumps in several applications.

Hydrogen peroxide places particular demands on transfer equipment. Kees In't Veen has put his faith in Blackmer® Sliding Vane Pumps.

COMPANY: ITT Transport Service Centre ? LOCATION: Rotterdam, The Netherlands ? MARKET: Truck Transport ? DISTRIBUTOR: Wiegel Transport Equipment, Moerdijk, The Netherlands ? CHALLENGE: Find reliable pump and compressor technologies that can be used to handle anything from hydrogen peroxide to industrial gases for a growing transport-service company at Europoort Rotterdam ? SOLUTION: Blackmer® STX and LGL Series Sliding Vane Pumps, and HDL362C Series Reciprocating Gas Compressors.

Blackmer® is pleased to announce that it will be exhibiting its world-class pump and compressor products for use in the transport and handling of LPG and Autogas at the 31st World LPG Forum 2018.

Shaft misalignment can result in compromised pumping-system uptime, reliability and safety. Blackmer® offers a solution with its new alignment-free GNX Series sliding vane pumps.

Kolbenkompressoren eignen sich perfekt für den Transfer einer Vielzahl von Industriegasen – aber nur, wenn der Kompressor hundertprozentig auf die spezifischen Anforderungen des Kunden abgestimmt wurde. Oder, anders ausgedrückt: für den Transfer von Industriegasen gibt es keine Standardlösung, nicht einmal für einander ähnliche Anwendungen.

While centrifugal pumps have been a first-choice technology for this industry, the operational advantages of screw pumps make them an intriguing alternative.

Shaft misalignment can result in compromised pumping-system uptime, reliability and safety, but Blackmer® offers a solution with its new alignment-free GNX Series Sliding Vane Pumps.

COMPANY: S.A. White Oil Company, Inc. ? LOCATION: Marietta, GA, USA ? MARKET: DEF Transport ? DISTRIBUTOR: Werts Welding & Tank Service, Inc., Doraville, GA, USA ? CHALLENGE: Identify a pumping technology to replace underperforming competitive transfer pumps that can efficiently and reliably transport DEF while providing a long pump life ? SOLUTION: Blackmer® SX1B-DEF Series Sliding Vane Pump

Blackmer® is proud and honored to announce that it is celebrating its 115-year anniversary in 2018.

Standard-setting operational efficiency and cost-effectiveness combined with versatile liquid-handling capabilities make sliding vane pumps a go-to technology in storage terminals.

Blackmer® pump and compressor technologies have played a leading role for more than a century in optimizing liquid-transfer operations in every corner of the globe, no matter the industry, the climate or the application.

Leading chemical-distribution company Brenntag North America relies on Blackmer® STX-DEF Series Sliding Vane Pumps to safely and efficiently deliver bulk quantities of DEF.

Storage terminals rely a great deal on pumps; Tom Stone recommends the use of sliding vane designs for their versatility and cost-effectiveness.

Blackmer® will be exhibiting its pump and compressor products for use in the transport and handling of LPG and Autogas in booths 47/48 at the 2018 AEGPL Congress.

Blackmer® is pleased to announce that it will be exhibiting at the International Liquid Terminals Association (ILTA) International Operating Conference and Trade Show on June 11-13 in Houston, TX, USA.

A guide to selecting and sizing reciprocating piston compressors for industrial use.

Reciprocating piston compressors are ideal for use in many industrial gas transfer applications, but only if the best solution is selected for the specific operational parameters.

Oil-free reciprocating piston compressor technology is just like any other. It only achieves its desired affect if it is utilised in the proper applications and, then, only after the proper amount of consideration and study has been performed before the nal technology choice is made. In other words, making assumptions based solely on past experience can lead to adverse consequences.

Standard-setting operational efficiency and cost-effectiveness combined with versatile liquid-handling capabilities make sliding vane pumps a go-to technology in storage terminals.

Wenner Gas And CHS, Inc., double capacity and throughput at Rockville Propane Terminal with the aid of Blackmer® LB601 Series Compressors and LGL4 Series Sliding Vane Pumps.